QForm Forum. Berlin. 27-29 May 2019



QForm Forum. Berlin
27—29 May 2019 

Latest developments in numerical simulation of metal forming
and heat treatment processes

We are glad to invite you to take part in the international QForm Forum which is dedicated to the latest developments in numerical simulation of metal forming and heat treatment processes. The event will be held on 27–29 May 2019 in Berlin, at Pentahotel Berlin-Köpenick. During the forum we will demonstrate a new version of QForm software which got a dozen of new possibilities. Representatives of research institutes and manufacturing companies will give talks about their experience in working with QForm software for development and improvement of technological processes. 

Program of QForm Forum 2019

27 May

18:00

Check-in at Pentahotel Berlin-Köpenick

19:00

Joint dinner at the hotel

28 May

General session. Language – English. Big conference room.

8:30

Complimentary speech
QForm Group, QuantorForm Ltd., Russia, CEO, Dr. Sergey Stebunov
GMT Berlin, Germany, CEO, Dr. Alexander Borowikow

8:35

New possibilities of QForm
QForm Group, Micas Simulations Ltd., UK, Managing Director, Dr. Nick Biba

9:00

Failure prediction models in QForm
QForm Group, QuantorForm Ltd., Russia, CEO, Dr. Sergey Stebunov

9:25

Microstructure simulation cases for steels, aluminum, titanium and nickel-based alloys
Bauman Moscow State Technical University, Head of laboratory of metal forming technologies, Dr. Artem Alimov

9:50

Coffee break

10:20

Cloud computing for simulation of metal forming processes
QForm Group, Head of Technical Support Department, Arthur Gartvig

10:45

Variation analysis of hot forging technology
QForm Group, Product Manager D/A/CH, Dmitry Gerasimov

11:10

Heat treatment simulation cases for steels, aluminum, titanium and nickel-based alloys
Bauman Moscow State Technical University, Head of laboratory of metal forming technologies, Dr. Artem Alimov

11:35

Forging technology design based on simulation
QForm Group, Business Development Manager, Stanislav Kanevskiy

12:00

Lunch

13:00

Sessions 1, 2, 3

15:05

Coffee break

15:25

Sessions 1, 2, 3

17:30

Sessions end

18:00

Boat trip on the river Spree

20:00

Dinner

Session 1. Bulk forming processes (language – English). Big conference room.

13:00

Incremental Bulk Metal Forming processes: Flow Forming, Rotary Forming, Rotary forging
Advanced Forming Research Centre, University of Strathclyde, UK, Research Fellow, Dr. Olga Bylya 

13:25

Improving the plasticity of materials in dieless drawing processes using FEM simulation and optimization
Department of Applied Computer Science and Modelling, AGH University of Science and technology, Poland, Prof. Andrij Milenin

13:50

Design of thermomechanical processing of die-forgings with aid of QForm
AGH University of Science and Technology, Poland, Ph.D., Eng., Assistant Professor, Piotr Skubisz

14:15

Optimized yield ratio and reduction of involving impurities in clad wire production by Conclad extrusion with twin wheels
Nihon University, College of Science and Technology, Department of Mechanical Engineering, Prof., Dr.-Ing.  Michihiko Hoshino

14:40

Modelling of severe plastic deformation processes
Karlsruhe Institute of Technology, Germany, Researcher, Dr. Roman Kulagin

15:05

Coffee break

15:25

New material property classes by integrating intensive forming into the thermomechanical treatment
GMT mbH, Germany, Dr.-Ing., Kristin Helas

15:50

Simulation of the production of layered metallic composite based on aluminum using the angular extrusion process
National Metallurgical Academy of Ukraine, Ukraine, Cand. of Tech. Sc., Associate Professor, Andrii Samsonenko

16:15

How QForm helps to save money and time
Birinci Otomotiv, Turkey, R&D Team Leader, Hakan Aydin

16:40

International Students Olympiad in Hot Bulk Forging and Extrusion Technologies
Bauman Moscow State Technical University, Head of laboratory of metal forming technologies, Dr. Artem Alimov

17:00

Session end

Session 2. Bulk forming processes (language – German). Conference room 2.

13:00

New possibilities of QForm. Overview with examples
QForm Group, Product Manager D/A/CH, Dmitry Gerasimov

14:00

Failure prediction models in QForm. Overview with examples
QForm Group, Product Manager D/A/CH, Dmitry Gerasimov

14:30

Simulation of profiled ring production
Schmiedewerke Gröditz GmbH, Germany, Dr. Alexander Kovalev

15:05

Coffee break

15:25

How to control FE Mesh parameters. What is it: adaptation and element size?
QForm Group, Product Manager D/A/CH, Dmitry Gerasimov

16:20

Interpretation of simulation results using standard subroutines
QForm Group, Product Manager D/A/CH, Dmitry Gerasimov

17:30

Session end

 Session 3. Aluminium profile extrusion (language – English). Conference room 3.

13:00

QForm Extrusion. New features and developments
QForm Group, Leading Engineer, Ivan Kniazkin

13:25

Detection of profile defects at die design stage by mean of simulation
CO.M.P.ES. Spa., Research & Development Department, Italy, PietroAlfredo Bevilacqua Fazzini

13:50

Some experimental results about common defects affecting productivity in extrusion process: Seam welds, Charge evolution, Billet skin
University of Bologna, Department of Industrial Engineering, Italy, Prof. Luca Tomesani

14:15

QForm Extrusion Die Designer (QExDD)
QForm Group, Leading Engineer, Ivan Kniazkin

14:40

Prediction of structural defects in profile extrusion by means of simulation
ASAS, Kadir Haşim Derman

15:05

Coffee break

15:25

Direct extrusion of aluminum profiles
Technical University of Berlin, Extrusion Research and Development Center, Germany, Dr.-Ing. Maik Negendank

15:50

Examples of effective use of QForm Extrusion. Comparison of simulation and experiment
QForm Group, Leading Engineer, Ivan Kniazkin

16:15

Material characterization techniques for extrusion: how to deal with high strains and strain rates
University of Bologna, Department of Industrial Engineering, Italy, Prof. Luca Tomesani

16:40

Industrial case study of die design optimization using innovative cartridge type solid die
Alumex Group, Sri Lanka, K.D.H.D Praveen Chathuranga

17:05

Economic aspects of simulation software implementation
QForm Group, Business Development Manager, Stanislav Kanevskiy

17:30

Session end

29 May

Master classes
 Session 1. Bulk forming processes (language – English). Big conference room.
Master classes. Lecturer: QForm Group, Head of Technical Support Department, Arthur Gartvig

8:30

New possibilities of QForm. Overview with examples
QForm Group, Product Manager D/A/CH, Dmitry Gerasimov

9:15

Failure prediction models in QForm. Overview with examples
QForm Group, Product Manager D/A/CH, Dmitry Gerasimov

10:00

Coffee break

10:30

Simulation of recrystallization in hot forging process

11:15

Hexahedral FE-Mesh and anisotropy of material properties

12:00

Session end

Session 2. Bulk forming processes (language – German). Conference room 2.
Master classes. Lecturer: QForm Group, Product Manager D/A/CH, Dmitry Gerasimov

8:30

Variance analysis of hot forging process

9:15

Failure prediction models in QForm

10:00

Coffee break

10:30

Simulation of recrystallization in hot forging process

11:15

Hexahedral FE-Mesh and anisotropy of material properties

12:00

Session end

Session 3. Aluminium profile extrusion (language – English). Conference room 3.
Master classes. Lecturer: QForm Group, Leading Engineer, Ivan Kniazkin

8:30

Advanced analysis of defects in aluminium profile extrusion

9:15

Extrusion variants. Optimization of technological parameters by means of simulation

10:00

Coffee break

10:30

Implementation of steady-state criterion for profile extrusion simulation

11:15

QForm for extrusion study

12:00

Session end

12:30

Lunch at the hotel restaurant

14:00–

15:30

Excursion to Society for the Advancement of Applied Computer Science (www.gfai.de)

Topic: «Use of modern information technologies in the steel manufacturing industry»

Place: Pentahotel Berlin-Köpenick, Grünauer Straße 1, 12557 Berlin, Germany

Cost of participation:

    • Free participation is proposed for speakers
    • 350 EURO + VAT for participants
    • 250 EURO + VAT for students
    • 200 EURO + VAT for accompanying persons (accompanying persons can participate in evening events on 27-28 May)

Recommendation:

For more effective participation in QForm Forum, please, bring your laptop with you to be able to simulate interesting projects in new QForm during event and get new QForm simulation skills.

Contact persons:

Mr. Dmitry Gerasimov
Product manager D/A/CH
QForm Group
[email protected]

Mr. Paul Mordvintsev
Head of Business Development Department
QForm Group
[email protected]

Participate in QForm Forum 2019

QForm Forum 2017. Sergei Stebunov with presentation «Industrial implementation of ring and wheel rolling simulation»QForm Forum 2017 participants

AddToAny